ICETEK-DM505M-A:Development kit for visual analysis_北京瑞泰创新伟业信息技术有限公司

DSP/

Product details

★ Product description:

The TI Media and Audio Processor DM505 is a highly optimized device designed for visual analysis applications.Its small dimension, low power consumption, containing two C66x floating-point VLIW DSP, support for complex embedded visual processing, at the same time also integrates multiple camera input interface, CAN and gigabit Ethernet, and other peripheral interfaces, support system in a more intelligent, more convenient, more effective way for human-computer interaction interface, suitable for industrial products in the visual analysis and machine vision processing.

ICETEK DM505M - A fully functional enhanced development kits, give priority to with TI DM505 processor, onboard DDR3 and FLASH memory, the extension DM505 data pins, and matches by video, audio, networking, LCD and other peripheral interfaces, is beneficial to teaching experiment, subject design and industrial product development, so as to speed up product design cycle and time to market, convenient for developers to design and maintenance.

★ICETEK-DM505M-A hardware features:

1. Main processor: DM505MRBABF

- Architecture specifically designed for visual analytics applications

- Video and image processing support:

. Full HD video (1920 x 1080p, 60fps)

. Video input and video output

- Up to 2 C66X Floating Point VLIW DSPs

. Object code is fully compatible with C67X and C64X +

. Up to 32 16 x 16-bit fixed-point multiplications per cycle

- Up to 512KB of L3 RAM on a chip

- Memory interface (EMIF) module: supports DDR3/DDR3L/DDR2/LPDDR2

- Dual ARM Cortex-M4 Image Processor (IPU)

- Display subsystem:

. Display controller with DMA engine

. CVIDEO/SD-DAC TV analog composite output

- Video Input Port (VIP) module: Supports up to 4 multiplexed input ports

- Enhanced direct memory access (EDMA) controller

- 3-port (2 external) Gigabit Ethernet (GMAC) switches

- 8 32-bit universal timers

- 3 configurable Universal Asynchronous Receiver and Transmitter (UART) modules

- Multimedia Card/Secure Digital/Secure Digital I/O Interface (MMC/SD/SDIO)

- 8-channel 10-bit ADC

- MIPI CSI-2 camera serial interface

- PWMSS

- Full HW image pipeline: DPC, CFA, 3D-NF, RGB-YUV

2. On-board DDR3 memory: 4GB x 3 pieces

3. EEPROM

4. On-board SPI Flash memory: 64M

5. CPLD

6. Data extension interface: 40PIN, EMIF/I2C/GPIO/INT and other data interfaces

7. 2 channels of video input: can input 2 channels of analog video signals at the same time

8. 14PIN JTAG interface:

- Debugging and emulating DM505

- Can be connected to ICETEK series development system

. ICETEK XDS100 V2 +

. ICETEK - XDS560 V2, etc

9. 2-channel gigabit network interface: to achieve gigabit network signal transmission

10. DM505 main processor extension interface: 100PIN x 2

- Extend the DM505 data pin

- Anti-misinsertion design, stable connection with application extension base plate or user-designed extension plate to realize high-speed data transmission

11. CSI camera extension interface: CSI camera can be connected

12. Power switch

13. +5V power input interface: input +5V power, with power protection function

14. Microphones

15. Line IN: Audio signal input

16. Mic IN: realize the input of audio signal

17. Headphone: realize the output of audio signal

18. Line OUT: Audio signal output

19. LCD interface: can be connected to the LCD display module

20. Data extension interface: 10PIN, extend UART/SPI data signal

21. Data extension interface: 10PIN, AD/DA data signal extension

22. UART interface: 4 pins to realize UART signal transmission

23. LCD screen: 1.8-inch, monochrome, 128 x 64 dot matrix

24. The CAN interface

25. The speaker

26. Video output interface: achieve 1 channel of analog video output

27. HDMI interface: to achieve HDMI signal transmission

28. 2-digit 8-digit digital display

29. Buzzer

30. Expansion module interface: Expansion module interface such as WIFI/GPS/GPRS, module needs to be purchased separately

31. User dialing switch: 4 digits

32. User indicator: 1 group

33. Extended mode interface: 1 group, with electrostatic protection function

34. Reset button

35. UART to USB interface

36. User keys: 1 group

37. CAN interface

38. RS-232 interface: realize RS-232 signal transmission

39. TF card interface

40. Overall dimensions:

- DM505 core board dimensions: 70mm(L) x 55mm(W)

- Extended bottom plate dimensions: 160mm(L) x 103mm(W)

★ Main application fields:

- Face recognition

- Intrusion Detection

- unmanned aerial vehicle (uav)

- the robot

- Intelligent machine vision

- Industrial transport: forklift, railway, agriculture, etc

- Video surveillance

- factory and building automation camera etc

Product Interest

Product Model：
Content：
Company Name：
Name：

Phone Number：
Email：

Address：